In the domestic disinfection supply center, besides cotton cloth, the most commonly used packaging materials are non-woven fabrics. When hospitals choose Filter Nonwoven Fabric, they often pay attention to the thickness (ie weight). Isn't the Thicker the Filter Nonwoven Fabric the better? Jin Haocheng Nonwovens will tell you the answer.
the answer is negative.
The increase in the thickness of Filter Nonwoven Fabric means an increase in the weight per unit area, and the corresponding strength will increase, but due to its own structural characteristics, the increase in thickness does not mean an increase in the barrier properties of microorganisms. For example, using a thick Filter Nonwoven Fabric, the increase in the weight of the spunbond layer can not effectively increase its anti-bacterial performance. Only when the pore size of the key filter layer (ie melt blown layer) can effectively filter the intrusion of microorganisms and dust, its resistance Bacterial performance meets the requirements. As the thickness increases, the air permeability of the packaging material will also be affected, and the probability of wet packs will increase.
In clinical use, non-woven fabrics will be damaged after sterilization. For this type of damage, the main reason is that the microscopic fine plastic fibers of Filter Nonwoven Fabric will shrink to a certain extent after high-temperature sterilization. The performance is after sterilization in use. The non-woven fabric is more brittle than before sterilization, so applying too much force or unreasonable picking and placing method to it during use will cause destructive damage to the packaging material. In addition, use burrs and sharper instruments on the edges. It will also cause damage to the non-woven fabric. Under this circumstance, it is recommended that the clinical packing should be tight enough, handled with care, and use the double-layer packing recommended by the specification, which will greatly reduce the probability of damage. If the problem of damage is only solved by increasing the thickness of the non-woven fabric, in addition to ensuring the anti-bacterial performance, it is also necessary to closely observe the probability of wet packs.
For the thickness selection of Filter Nonwoven Fabric, Jinhaocheng Non-woven Fabric, Melt-blown Non woven Fabric, Non-woven Finished Product, Spunlace Nonwoven Fabric,
Filter Nonwoven Fabric, Felt-Needle-punched Nonwoven provide you with professional answers. If you have other relevant information inquiries, you can contact us.
Our homepage: https://www.jhc-nonwoven.com/
E-mali: hc@hzjhc.net
lh@hzjhc.net
Post time: Jun-07-2021