ผ้าไม่ทอ SMS ซึ่ง | จินห่าวเฉิง

มาสก์เป็นผ้าไม่ทอซึ่งเป็นผ้าไม่ทอเมื่อเทียบกับผ้าสิ่งทอและประกอบด้วยเส้นใยแบบทิศทางหรือแบบสุ่ม

หน้ากากอนามัยโดยทั่วไปมีโครงสร้างหลายชั้นซึ่งโดยทั่วไปเรียกว่าโครงสร้าง SMS (ชั้น 2 S และ 1 M) ปัจจุบันจำนวนชั้นสูงสุดในประเทศจีนคือ 5 ชั้น ได้แก่ SMMMS (ชั้น 2 S และชั้น 3 M)

SMS คืออะไร?

https://www.jhc-nonwoven.com/products/melt-blown-mon-woven-fabric

ในที่นี้ S ย่อมาจาก Spunbond layer เส้นผ่านศูนย์กลางของเส้นใยค่อนข้างหนาประมาณ 20 ไมครอน (ม.) หน้าที่หลักของชั้นสปันบอนด์ 2 S คือการรองรับโครงสร้างผ้าไม่ทอทั้งหมดซึ่งไม่มีผลกระทบอย่างมากต่อสิ่งกีดขวางส่วนที่สำคัญที่สุดของหน้ากากคือชั้นกั้นหรือชั้น Meltblown M (ชั้น Meltblown) เส้นผ่านศูนย์กลางของชั้นสเปรย์หลอมเหลวนั้นค่อนข้างบางประมาณ 2 ไมครอน (M) ดังนั้นจึงมีขนาดเพียงหนึ่งในสิบของเส้นผ่านศูนย์กลางของชั้นสปันบอนด์ซึ่งมีบทบาทสำคัญในการป้องกันแบคทีเรียและการเจาะเลือด

https://www.jhc-nonwoven.com/disposable-medical-mask-jinhaocheng.html

หน้ากากแพทย์ทั่วไปมักใช้ผ้าสเปรย์ละลายน้ำหนัก 20 กรัมหน้ากาก N95 ใช้ผ้าสเปรย์ละลายน้ำหนัก 40 กรัมขึ้นไป

ตามสถิติของ China Industrial Textile Industry Association ภายในสิ้นปี 2561 มีสายการผลิตสปันบอนด์ในประเทศ 1,477 สายมากกว่าปีก่อนหน้า 65 สายโดยเพิ่มขึ้น 4.6% เมื่อเทียบเป็นรายปีโดย PP สายการผลิตแบบไม่ใช้ผ้าสปันบอนด์เพิ่มขึ้น 3.38% สายการผลิตคอมโพสิต SMS เกือบ 13% และสายการผลิตแบบไม่ทอแบบสปันบอนด์ของ PET เพิ่มขึ้น 9.32% จำนวน บริษัท ที่มีผลผลิตต่อปีเกิน 50,000 ตันก็เพิ่มขึ้นจากปี 2560 เช่นกัน กำลังเร่งการพัฒนาไปสู่ขนาดความเข้มข้นและระดับไฮเอนด์เพื่อตอบสนองความต้องการของตลาดในการอัพเกรดผลิตภัณฑ์และการอัพเกรดเทคโนโลยี

ตั้งแต่ปีพ. ศ. 2561 บริษัท ในประเทศจำนวนมากได้พัฒนาผลิตภัณฑ์ของตนในทิศทางที่เบาขึ้นบางลงและมีประสิทธิภาพที่สูงขึ้นและได้ผลลัพธ์ที่ดีกระบวนการคอมโพสิตที่ทำด้วยสปันบอนด์ / หลอมเหลว SSMMS 600 เมตร / นาทีหรือสูงกว่าการทำงานด้วยความเร็วสูงประมาณ 10 กรัมต่อตารางเมตรนุ่มเป็นพิเศษ ผลิตภัณฑ์คุณภาพแสงคงที่ยังคงปรากฏอยู่

https://www.jhc-nonwoven.com/disposable-medical-mask-jinhaocheng.html

ผ้าไม่ทอ SMS มาจากไหน?

ผ้าไม่ทอ SMSส่วนใหญ่ทำจากโพลีโพรพีลีน PP (มีคุณสมบัติแบคทีเรียตามธรรมชาติและความไม่ชอบน้ำ) และเส้นผ่านศูนย์กลางของเส้นใยสามารถเข้าถึง 0.5-10 ไมครอน เส้นใยที่มีความละเอียดเป็นพิเศษเหล่านี้มีความสามารถพิเศษในการเพิ่มปริมาณและพื้นที่ผิวของเส้นใยต่อหน่วยพื้นที่ดังนั้นจึงทำให้ผ้าที่พ่นละลายมีคุณสมบัติในการกรองอากาศที่ดีทำให้เป็นวัสดุหน้ากากที่ค่อนข้างดี

At present, there are three main processes for manufacturing SMS products (SMS non-woven fabric) : "one-step process", "two-step process" and "one-and-a-half step process".

One-step features is the use of raw materials section of this process, using two spun-bonded, melt-blown technology, direct spinning raw material after melting into the nets, as long as reasonable arrangement of different process of spinning systems engineering, and can make the products with different structure, each layer fabric laminated composite, is usually with a hot rolling mill consolidation into cloth."One-step method" is characterized by melting directly spinning into a net, the state of each spinning system can be independently adjusted, the production process of strong control, good health conditions, high speed, can adjust the proportion of each layer of fiber net, can produce SMS type products of various specifications, is the mainstream technology today.

Two-step process: When using the two-step process to produce SMS products, the finished products of spunbonded cloth and melt-sprayed cloth are unrolled in a certain order, and then laminated in a sequence, and then consolidated with a hot mill, and compounded into SMS products.The two-step method is characterized by simple equipment and low cost.In fact, the "two-step" process is the widely used lamination composite technology, but also can be composite of other materials, with different other materials, and with different methods, such as ultrasonic, hot melt adhesive three layers of materials together.

One-and-a-half step method: in two-step method, it is also possible to replace the molten spraying cloth product with the molten spraying layer fiber net produced in the field, thus derived the so-called "one-half step method" composite process.The spunbonded cloth is used as the bottom layer and the surface layer by two unwinding devices, and the melt spraying fiber net of the middle layer is directly spun into a net by the melt spraying system, laid on the bottom layer of the spunbonded cloth, and then covered with the upper layer of the spunbonded cloth, it is better to use a hot mill consolidated into SMS products.


เวลาโพสต์: Sep-14-2020
แชทออนไลน์ WhatsApp!