The difference between ffp2 masks and n95 masks: N95 masks are one of the nine types of particulate protective masks certified by NIOSH (National Institute for Occupational Safety and Health). The protection level of N95 means that under the testing conditions specified by the NIOSH standard, the filtration efficiency of the mask filter material for non-oily particles (such as dust, acid mist, paint mist, microorganisms, etc.) reaches 95%. FFP2 mask is one of the European mask standards EN149:2001. Its function is to absorb harmful aerosols, including dust, fumigation, mist droplets, poisonous gas and poisonous vapor, through the filter material to prevent them from being inhaled. The minimum filtration effect of FFP2 masks is >94%. Therefore, the difference between ffp2 masks and n95 masks is similar to the national standards implemented, and the protective effects are similar.
If FFP2 mask factories need to pay FFP2 mask factory price or wholesale FFP2 masks to European countries and regions, they need to pass CE certification, namely ce certification ffp2 mask, ce certification ffp2 mask factory.
Precautions for the use of protective masks:
Wash your hands before wearing the mask, or avoid touching the inner side of the mask with your hands during the process of wearing the mask to reduce the possibility of the mask being contaminated. Distinguish the inside and outside, top and bottom of the mask. Do not squeeze the mask with your hands. N95 masks can only isolate the virus on the surface of the mask. If you squeeze the mask with your hands, the virus will soak through the mask with droplets, which will easily cause virus infection. Try to make the mask and the face have a good seal. The simple test method is: after wearing the mask, exhale forcefully, and the air cannot leak from the edge of the mask. The protective mask must fit snugly against the user's face, and the user must shave to ensure that the mask fits snugly against the face. Beards and anything between the mask seal and the face can leak the mask. After adjusting the position of the mask according to your face shape, use the index fingers of both hands to press the nose clip along the upper edge of the mask to make it close to the face.
Ordinary people can wear ordinary medical masks or disposable protective masks, but here I want to appeal to everyone to try to leave these medical protective masks to the frontline medical staff, who are the ones who need these masks the most. Don't just pursue high-level protective masks. Ordinary medical masks are enough for most healthy people who are not in the epidemic area. The virus is still raging. In order to meet the daily protection needs, anti-particulate respirators, that is, dust masks, are essential. Whether it is a medical surgical mask or an FFP2 mask, it can isolate the virus in daily life. But any mask is not a panacea. It is not necessary. Going out less and gathering less, washing hands frequently and ventilating more are the best protection for yourself and your family.
The quality of our melt blown fabric is mainly divided into standard salt melt-blown cloth and high-efficiency low-resistance oil melt-blown cloth. The Standard salt melt-blown cloth is suitable for the production of disposable medical masks, disposable civilian masks, N95, and national standard KN95 masks, while the high-efficiency low-resistance oil melt blown fabric is proper for the production of children’s masks, N95, KN95, KF94, FFP2, FFP3 masks.
Post time: Oct-28-2022