ಮಾಸ್ಕ್ ಕೋರ್ - ಕರಗಿದ ಬಟ್ಟೆ | ಜಿನ್ಹಾಚೆಂಗ್

Masks the core of the ಕರಗಿದ ಬಟ್ಟೆಯಪಾಲಿಪ್ರೊಪಿಲೀನ್ ಸೂಪರ್‌ಫೈನ್ ಫೈಬರ್ ಜೊತೆಗೆ ಯಾದೃಚ್ distribution ಿಕ ವಿತರಣೆ, ನೋಟ, ನಯವಾದ, ಮೃದು ಮತ್ತು ಬಿಳಿ ವಸ್ತುವಿನ ಫೈಬರ್ ಉತ್ಕೃಷ್ಟತೆ 0.5 ರಿಂದ 1.0 mu ಮೀ, ಉಷ್ಣ ಬಂಧಕ್ಕೆ ಹೆಚ್ಚಿನ ಅವಕಾಶಗಳನ್ನು ಒದಗಿಸಲು ಫೈಬರ್‌ನ ಯಾದೃಚ್ distribution ಿಕ ವಿತರಣೆ ಫೈಬರ್ ನಡುವೆ ಮತ್ತು ಕರಗಿದ ಅನಿಲ ಶುದ್ಧೀಕರಣ ವಸ್ತುವು ದೊಡ್ಡ ನಿರ್ದಿಷ್ಟ ಮೇಲ್ಮೈ ವಿಸ್ತೀರ್ಣ, ಹೆಚ್ಚಿನ ಸರಂಧ್ರತೆ (75%) ಅಥವಾ ಹೆಚ್ಚಿನದನ್ನು ಹೊಂದಿರುತ್ತದೆ. ಹೆಚ್ಚಿನ ವೋಲ್ಟೇಜ್ ಸ್ಟೇಷನರ್ ಶೋಧನೆ ದಕ್ಷತೆಯ ಮೂಲಕ, ಉತ್ಪನ್ನವು ಕಡಿಮೆ ಪ್ರತಿರೋಧ, ಹೆಚ್ಚಿನ ದಕ್ಷತೆ ಮತ್ತು ಹೆಚ್ಚಿನ ಧೂಳಿನ ಸಾಮರ್ಥ್ಯದ ಗುಣಲಕ್ಷಣಗಳನ್ನು ಹೊಂದಿದೆ .

ಮುಖವಾಡದ ತಿರುಳು

http://www.jhc-nonwoven.com/melt-blown-fabric-for-mask-jinhaocheng.html

http://www.jhc-nonwoven.com/products/melt-blown-mon-woven-fabric

Melt-blown non-woven fabric as a new type of high efficient filter material is the "heart" masks, compared with traditional filter material, air filtration and purification efficiency into the improvement of one hundred times, is now the most suitable for biological health protection materials (activated carbon and similar material can be used for protective chemicals, against bacteria and viruses without filtration purification function).Its birth unexpectedly overnight the medical profession USES a hundred years gauze mask completely eliminated.Medical protection is generally divided into three levels according to the level of protection requirements.The light-blue "surgical masks" that we wear most often can be used for primary protection, primarily against the harmful transmission of droplets containing pathogens in daily life and production.The key measure to improve the protective ability is to add a filter layer made of melt-sprayed non-woven cloth in the middle of the mask.

ಮುಖವಾಡದ ಮಧ್ಯದಲ್ಲಿರುವ ರಕ್ಷಣಾತ್ಮಕ ಪದರವು (ಸಂಕ್ಷಿಪ್ತವಾಗಿ ಎಂ ಲೇಯರ್) ಪಾಲಿಪ್ರೊಪಿಲೀನ್ ಕರಗಿದ-ಸಿಂಪಡಿಸದ ನಾನ್ ನೇಯ್ದ ಬಟ್ಟೆಯಾಗಿದೆ, ಮತ್ತು ಮುಖವಾಡದ ಮುಂಭಾಗ ಮತ್ತು ಹಿಂಭಾಗದ ಬದಿಗಳು ಸ್ಪನ್‌ಬ್ಯಾಂಡೆಡ್ ಪದರಗಳಾಗಿವೆ (ಸಂಕ್ಷಿಪ್ತವಾಗಿ ಎಸ್ ಲೇಯರ್). ಮಟ್ಟವನ್ನು ಅವಲಂಬಿಸಿ ರಕ್ಷಣೆ ಅಗತ್ಯ, ಒಂದರಿಂದ ಹೆಚ್ಚಿನ ಪದರಗಳನ್ನು ಎಂ ಲೇಯರ್‌ನಲ್ಲಿ ಇರಿಸಬಹುದು.ಇದು ಲೆವೆಲ್ 1 ರಕ್ಷಣಾತ್ಮಕ ಮುಖವಾಡವಾಗಿದ್ದರೆ, ಎಂ ಲೇಯರ್ ಬಳಸಿ. ಎನ್ 95 ನಂತಹ ಲೆವೆಲ್ 3 ಉಸಿರಾಟಕಾರಕಕ್ಕಾಗಿ, ಎಂ-ಲೇಯರ್‌ಗೆ ಮೂರು ಪದರಗಳ ಕರಗುವ-ಸಿಂಪಡಣೆಯ ಅಗತ್ಯವಿರುತ್ತದೆ ನಾನ್ ನೇಯ್ದ ಬಟ್ಟೆ ಅಥವಾ ಹೆಚ್ಚು. ಸಹಜವಾಗಿ, ಎಂ ಪದರದ ಹೆಚ್ಚು ಪದರಗಳು, ಮುಖವಾಡದ ಕೆಟ್ಟ ಗಾಳಿಯ ಪ್ರವೇಶಸಾಧ್ಯತೆ, ನಿರ್ದಿಷ್ಟ ಉತ್ಪನ್ನಗಳು ವಿಭಿನ್ನವಾಗಿರುತ್ತದೆ.

http://www.jhc-nonwoven.com/products/melt-blown-mon-woven-fabric

ನಾವು ಮುಖವಾಡವನ್ನು ತೆರೆದರೆ, ಮೇಲಿನ ಮೂರು ಪದರಗಳನ್ನು ನಾವು ನೋಡುತ್ತೇವೆ, ಅವುಗಳೆಂದರೆ ಹೈಗ್ರೊಸ್ಕೋಪಿಕ್ ಲೇಯರ್, ಕೋರ್ ಫಿಲ್ಟರ್ ಲೇಯರ್ ಮತ್ತು ನೀರಿನ ತಡೆ ಪದರ.

ಮಾಸ್ಕ್ ಫಿಲ್ಟರ್ ಪದರದ ಮಧ್ಯದಲ್ಲಿರುವ ಮೆಲ್ಟ್ ಸ್ಪ್ರೇ ಬಟ್ಟೆಯು ಬ್ಯಾಕ್ಟೀರಿಯಾವನ್ನು ಫಿಲ್ಟರ್ ಮಾಡಬಹುದು, ಸೂಕ್ಷ್ಮಜೀವಿಗಳ ಹರಡುವಿಕೆಯನ್ನು ತಡೆಯುತ್ತದೆ. ಸ್ಪ್ರೇ ಬಟ್ಟೆಯನ್ನು ಕರಗಿಸಿ, ಸ್ಪ್ರೇ ಬಟ್ಟೆಯನ್ನು ಮುಖ್ಯವಾಗಿ ಪಾಲಿಪ್ರೊಪಿಲೀನ್‌ಗೆ ಕರಗಿಸಿ ಮುಖ್ಯ ಕಚ್ಚಾ ವಸ್ತುವಾಗಿ, ಫೈಬರ್ ವ್ಯಾಸವು 1 ~ 5 ಮೈಕ್ರಾನ್ ತಲುಪಬಹುದು. ವಿಶಿಷ್ಟ ಕ್ಯಾಪಿಲ್ಲರಿಟಿ ರಚನೆಯನ್ನು ಹೊಂದಿರುವ ಅಲ್ಟ್ರಾಫೈನ್ ಫೈಬರ್ಗಳು ಪ್ರತಿ ಯುನಿಟ್ ಪ್ರದೇಶಕ್ಕೆ ಎಳೆಗಳ ಸಂಖ್ಯೆ ಮತ್ತು ಮೇಲ್ಮೈ ವಿಸ್ತೀರ್ಣವನ್ನು ಹೆಚ್ಚಿಸುತ್ತವೆ, ಇದರಿಂದಾಗಿ ಕರಗುವ-ಜೆಟ್ ಬಟ್ಟೆಯು ಉತ್ತಮ ಫಿಲ್ಟರಿಂಗ್, ಗುರಾಣಿ, ನಿರೋಧನ ಮತ್ತು ತೈಲ ಹೀರಿಕೊಳ್ಳುವ ಗುಣಲಕ್ಷಣಗಳನ್ನು ಹೊಂದಿರುತ್ತದೆ.ಇದನ್ನು ಗಾಳಿ, ದ್ರವ ಶುದ್ಧೀಕರಣ ವಸ್ತುಗಳು, ಪ್ರತ್ಯೇಕ ವಸ್ತುಗಳಲ್ಲಿ ಬಳಸಬಹುದು , ಹೀರಿಕೊಳ್ಳುವ ವಸ್ತುಗಳು, ಮುಖವಾಡ ವಸ್ತುಗಳು, ಉಷ್ಣ ನಿರೋಧನ ವಸ್ತುಗಳು, ತೈಲ ಹೀರಿಕೊಳ್ಳುವ ವಸ್ತುಗಳು ಮತ್ತು ಒರೆಸುವ ಬಟ್ಟೆ ಮತ್ತು ಇತರ ಕ್ಷೇತ್ರಗಳು.

ಪ್ರತಿಬಂಧ ಮತ್ತು ಹೊರಹೀರುವಿಕೆ

https://www.jhc-nonwoven.com/products/melt-blown-mon-woven-fabric

ಕರಗಿದ ಬಟ್ಟೆಯು ಹೆಚ್ಚಿನ ಕರಗುವ ಸೂಚಿಯನ್ನು ಹೊಂದಿರುವ ಒಂದು ರೀತಿಯ ಪಾಲಿಪ್ರೊಪಿಲೀನ್ ಆಗಿದೆ, ಇದು ಯಾದೃಚ್ direction ಿಕ ದಿಕ್ಕಿನಲ್ಲಿ ಲ್ಯಾಮಿನೇಟ್ ಮಾಡಲಾದ ಅನೇಕ ಕ್ರಿಸ್-ಕ್ರಾಸ್ ಫೈಬರ್ಗಳಿಂದ ಮಾಡಲ್ಪಟ್ಟಿದೆ. ಎಳೆಗಳ ವ್ಯಾಸವು 0.5 ರಿಂದ 10 ಮೈಕ್ರಾನ್‌ಗಳವರೆಗೆ ಇರುತ್ತದೆ, ಮತ್ತು ಎಳೆಗಳ ವ್ಯಾಸವು ಕೂದಲಿನ ಮೂವತ್ತನೇ ಒಂದು ಭಾಗವಾಗಿರುತ್ತದೆ.

ಚಿತ್ರದಿಂದ ನೋಡಬಹುದಾದಂತೆ, ಎಲೆಕ್ಟ್ರಾನ್ ಮೈಕ್ರೋಸ್ಕೋಪ್ ಅಡಿಯಲ್ಲಿ ಮುಖವಾಡದಲ್ಲಿ ಇನ್ನೂ ಅನೇಕ ಅಂತರಗಳಿವೆ. ಹಾಗಾದರೆ ನಾವು ವೈರಸ್ ಅನ್ನು ಹೇಗೆ ನಿರ್ಬಂಧಿಸಬಹುದು?

https://www.jhc-nonwoven.com/products/melt-blown-mon-woven-fabric

ಮುಖವಾಡಗಳುಎರಡು ಕೆಲಸಗಳನ್ನು ಮಾಡುವ ಮೂಲಕ ವೈರಸ್‌ಗಳಿಂದ ರಕ್ಷಿಸುತ್ತವೆ: ಬಲೆ ಮತ್ತು ಬಲೆ

ಪ್ರತಿಬಂಧ:

The filter material relies on textile or non-woven processes to achieve the density of the fibers in the space and form a certain network of pores, thus forming a "blocking" effect on the flowing air. The larger particles in the air are either "intercepted" by the collision with the fibers or by the fiber mesh blocking on the side of the filter material.For non-biological particles in the air (such as dust, PM2.5, etc.), the purification efficiency of masks mainly depends on the single interception ability of filter materials.

ಹೊರಹೀರುವಿಕೆ:

For biological protective masks, due to the very small physical size of pathogens such as viruses, it is difficult to purify most of the harmful substances by interception of mask fiber gaps. Therefore, electrostatic adsorption has become an indispensable key feature of mask protection function.Traditional natural fibers are very weak in generating and carrying static electricity, so gauze masks have little adsorption effect.And the non-polar polymer melt jet fiber is an excellent material for electrostatic generation and retention (this point, you can compare the feeling of wearing pure cotton clothing and chemical fiber clothing), making it "inherently" has excellent adsorption performance.Researchers have done a lot of work on how to generate and maintain the electrostatic efficiency of filter materials. In mask production, mechanical or electronic means are used to enrich the electrostatic charge into molten spray materials.

ಸ್ಥಾಯೀವಿದ್ಯುತ್ತಿನ ಹೊರಹೀರುವಿಕೆಯ ವಿಶಿಷ್ಟ ಸಾಮರ್ಥ್ಯದಿಂದಾಗಿ, ಕರಗುವ ತುಂತುರು ತಂತ್ರಜ್ಞಾನವು ನೈಸರ್ಗಿಕ ನಾರುಗಳಿಗಿಂತ ಚಿಕ್ಕದಾದ ಒಂದು ವ್ಯಾಸವನ್ನು ಹೊಂದಿರುವ ರಾಸಾಯನಿಕ ನಾರುಗಳನ್ನು ಉತ್ಪಾದಿಸಬಲ್ಲದು, ಇದು ರಾಸಾಯನಿಕ ಹೊರಹೀರುವಿಕೆಯ ಪೀಳಿಗೆಗೆ ಸಹಕಾರಿಯಾಗಿದೆ.ಪಾಲಿಪ್ರೊಪಿಲೀನ್ ಕರಗಿದ-ಸಿಂಪಡಿಸದ ನಾನ್-ನೇಯ್ದ ಬಟ್ಟ ನಿಸ್ಸಂದೇಹವಾಗಿ ವೈದ್ಯಕೀಯ ರಕ್ಷಣಾತ್ಮಕ ಮುಖವಾಡ ವಸ್ತುಗಳಿಗೆ ಮೊದಲ ಆಯ್ಕೆಯಾಗಿದೆ

 


ಪೋಸ್ಟ್ ಸಮಯ: ನವೆಂಬರ್ -14-2020
ವಾಟ್ಸಾಪ್ ಆನ್‌ಲೈನ್ ಚಾಟ್!