एसएमएस गैर बुने हुए कपड़े से | JINHAOCHENG

मुखौटे गैर-बुने हुए कपड़े हैं, जो गैर-बुने हुए कपड़े हैं, जो कपड़ा वस्त्रों के विपरीत हैं, और जो दिशात्मक या यादृच्छिक फाइबर से बने होते हैं।

मेडिकल मास्क आमतौर पर बहुस्तरीय संरचनाएं होती हैं, जिन्हें आमतौर पर एसएमएस संरचनाओं (2 एस और 1 एम परतों) के रूप में जाना जाता है। वर्तमान में, चीन में परतों की उच्चतम संख्या 5 है, अर्थात् एसएमएमएमएस (2 एस परत और 3 एम परत)।

एसएमएस क्या है?

https://www.jhc-nonwoven.com/products/melt-blaze-mon-woven-fabric

यहाँ, S, Spunbond लेयर के लिए है। फाइबर का व्यास अपेक्षाकृत मोटा है, लगभग 20 माइक्रोन (एम)। 2 एस स्पैनबोंड परतों का मुख्य कार्य पूरे गैर-बुने हुए कपड़े की संरचना का समर्थन करना है, जिसका बाधा पर कोई बड़ा प्रभाव नहीं पड़ता है। मुखौटा का सबसे महत्वपूर्ण हिस्सा बाधा परत या मेल्टब्लाऊन परत एम (मेल्टब्लाउन परत) है। पिघले हुए स्प्रे परत का व्यास अपेक्षाकृत पतला है, लगभग 2 माइक्रोन (एम), इसलिए यह स्पोनबोनिंग परत के व्यास का केवल दसवां हिस्सा है, जो बैक्टीरिया और रक्त के प्रवेश को रोकने में महत्वपूर्ण भूमिका निभाता है।

https://www.jhc-nonwoven.com/disposable-medical-mask-jinhaocheng.html

सामान्य मेडिकल मास्क आमतौर पर 20 ग्राम वजन के एमल स्प्रे कपड़े का उपयोग करते हैं, एन 95 कप मास्क 40 ग्राम या अधिक वजन वाले पिघले स्प्रे कपड़े का उपयोग करते हैं।

चाइना इंडस्ट्रियल टेक्सटाइल इंडस्ट्री एसोसिएशन के आंकड़ों के अनुसार, 2018 के अंत तक 1,477 घरेलू उत्पादन लाइनें हैं, जो पिछले वर्ष की तुलना में 65% अधिक है, जिसमें साल-दर-साल वृद्धि 4.6% है, जिसके बीच, पी.पी. Spunbonded नॉन-वोवेंस प्रोडक्शन लाइन में 3.38%, SMS कम्पोज़िट प्रोडक्शन लाइन द्वारा लगभग 13% और PET Spunbonded नॉन-वॉवेन्स प्रोडक्शन लाइन में 9.32% की वृद्धि की जाती है। 50,000 टन से अधिक वार्षिक उत्पादन वाली कंपनियों की संख्या भी 2017.Spunbonded उद्यमों से बढ़ी है। उत्पाद उन्नयन और प्रौद्योगिकी उन्नयन की बाजार की मांग को पूरा करने के लिए पैमाने, गहनता और उच्च अंत की दिशा में अपने विकास को गति दे रहे हैं।

2018 के बाद से, कई घरेलू उद्यमों ने अपने उत्पादों को हल्के, पतले और उच्च प्रदर्शन की दिशा में विकसित किया है, और अच्छे परिणाम प्राप्त किए हैं ।SSMMS गोलाकार / पिघले हुए शॉटक्रेटिंग मिश्रित प्रक्रिया 600 मीटर / मिनट या उच्च गति ऑपरेशन के ऊपर; लगभग 10 ग्राम प्रति वर्ग मीटर सुपर सॉफ्ट; हल्के स्थिर गुणवत्ता वाले उत्पाद उभर कर आते रहते हैं।

https://www.jhc-nonwoven.com/disposable-medical-mask-jinhaocheng.html

एसएमएस गैर-बुने हुए कपड़े कहां से आते हैं?

एसएमएस गैर-बुने हुए कपड़े मुख्य रूप से पॉलीप्रोपाइलीन पीपी (प्राकृतिक बैक्टीरियोस्टेटिक गुणों और हाइड्रोफोबिसिटी के साथ) से बने होते हैं, और फाइबर का व्यास 0.5-10 माइक्रोन तक पहुंच सकता है। अद्वितीय केशिका के साथ इन पराबैंगनी तंतुओं में प्रति इकाई क्षेत्र में तंतुओं की मात्रा और सतह क्षेत्र में वृद्धि होती है, इस प्रकार पिघल-छिले हुए कपड़े में अच्छे वायु फ़िल्टरिंग गुण होते हैं, जिससे वे अपेक्षाकृत अच्छा मुखौटा सामग्री बनते हैं।

At present, there are three main processes for manufacturing SMS products (SMS non-woven fabric) : "one-step process", "two-step process" and "one-and-a-half step process".

One-step features is the use of raw materials section of this process, using two spun-bonded, melt-blown technology, direct spinning raw material after melting into the nets, as long as reasonable arrangement of different process of spinning systems engineering, and can make the products with different structure, each layer fabric laminated composite, is usually with a hot rolling mill consolidation into cloth."One-step method" is characterized by melting directly spinning into a net, the state of each spinning system can be independently adjusted, the production process of strong control, good health conditions, high speed, can adjust the proportion of each layer of fiber net, can produce SMS type products of various specifications, is the mainstream technology today.

Two-step process: When using the two-step process to produce SMS products, the finished products of spunbonded cloth and melt-sprayed cloth are unrolled in a certain order, and then laminated in a sequence, and then consolidated with a hot mill, and compounded into SMS products.The two-step method is characterized by simple equipment and low cost.In fact, the "two-step" process is the widely used lamination composite technology, but also can be composite of other materials, with different other materials, and with different methods, such as ultrasonic, hot melt adhesive three layers of materials together.

One-and-a-half step method: in two-step method, it is also possible to replace the molten spraying cloth product with the molten spraying layer fiber net produced in the field, thus derived the so-called "one-half step method" composite process.The spunbonded cloth is used as the bottom layer and the surface layer by two unwinding devices, and the melt spraying fiber net of the middle layer is directly spun into a net by the melt spraying system, laid on the bottom layer of the spunbonded cloth, and then covered with the upper layer of the spunbonded cloth, it is better to use a hot mill consolidated into SMS products.


पोस्ट समय: सितंबर-14-2020
WhatsApp ऑनलाइन चैट!